Specification: PET-PVC
Items Description Tolerance
Base Materials CR/EGI/ Aluminum +/-0.05
Thickness of Base Material(mm) 0.40, 0.45, 0.50, 0.60, 0.70, 0.80, 1.0 +/-0.06
Top side PET-PVC Laminated with PET-PVC film
Thickness of the film(mm) 0.2-2.0 +/-0.04
Bottom side Painting, Thickness 5~20um
Size of Products
Length(mm) 500-400(Customized) +/-0.5
Width(mm) 230-1450(Customized) +/-0.5
Enterprise Standard
Erichsen Test above 30N/20mm
Impact Test No separation
Bending Test No separation, broken and exuviations
Cold Resistance Test No blister, broken and separation
Boiling Water Test No shrink, exuviations, broken, wrinkle, peel off and change in Color
Salt Resistance Test No rust
Didfigrement Grade 2
Specification of products
PCM
Items Description Tolerance
Base Materials CR/EGI/ Aluminum +/-0.05
Thickness of Base Material(mm) 0.2~2.0 +/-0.06
Top side Color Polyester Painting
Thickness of film(mm) 0.10, 0.13, 0.15, 0.20, 0.25, 0.30 +/_ 0.05
Bottom side painting, Thickness (um)
Size of products
Length(mm) 500-4000 customized +/-0.5
Width(mm) 230-1450 customized +/-0.5
Enterprise standard
Color tone within the limit
Gloss test standard gloss +/-5%
Bending test No crack, no peeling
Acid resistance abnormalities should not happen
Salt resistance test red corrosion should not happen